10%-15% CCA Customization Bare Copper Clad Aluminum Wire 0.12 /0.14/0.16/0.24/0.3 of High Quality Cable Suppliers

Product Description

Copper Clad Aluminum (CCA) Introduction

Copper-clad aluminum wire is a double-metal wire composed of an aluminum core wire and a copper layer tightly wrapped around it.

According to the volume ratio of the copper layer, it can be divided into two types: 10% and 15%, their densities are 3.32g/mm³ and 3.63g/mm³ respectively, and the DC resistivity at 20°C is <0.027432mm²/m and <0.0267692mm² respectively /m.

According to the mechanical properties, it can be divided into two types: soft state (A) and hard state (H).

Acceptance criteria for copper clad aluminum wire:

At present, copper-clad aluminum is produced and inspected according to the SJ/T 11223-2000 copper-clad aluminum wire standard. If the customer has special requirements, I can also formulate special production methods according to the customer's requirements.

Standard

Materials and Manufacturing
The copper-clad aluminum wire shall consist of an aluminum core and a continuous copper layer on the outside, and the copper layer shall be fully combined with the core wire. The quality of copper-clad aluminum wire should meet the requirements of this standard.

Dimensional quality
The size of the copper-clad aluminum wire should be indicated by the wire diameter in inches, and its decimal point is accurate to 0.0001 inch (0.003 mm). Wire diameters shall not vary by more than ±0.0001 inches (±0.003 mm) from the specified diameter for wire diameters up to 0.0100 inches (0.254 mm), and wire diameters shall not vary by more than 0.01130 inches (0.254 mm) and greater ±1% of stated diameter, dimensions expressed to the nearest 0.0001 inch (0.003 mm).

Power transmission:
1. Select the conductor material of the enameled wire;
2. Power cable conductor material;
3. Control cable conductor material;
4. Inner conductor of automobile and locomotive cables;
5. Construction cable conductor material;
6. Busbar conductor material;
7. Fuse;
8. RF shielded cable network;

Special magnet wire:
1. Select computer conductor material;
2. Mobile communication line;
3. Coils or cylinders used in aerospace or military equipment;

Normal packaging:
Spool size: DIN 130, DIN 160, DIN 185, DIN 200, DIN250, DIN 400, DIN 500, DIN630, DIN 780;

Specification

Packing & Delivery

Company Profile

Wuxi Jiangnan Cable Co., Ltd. (hereinafter referred to as “the Company”) a National Key High and New Tech Enterprise specialized in production, sales and research on cables & wires. It is a national customer satisfaction benchmark enterprise, "Top 500 China's Manufacturing Industry", "Top 500 China's Private Enterprises", "Top 500China's Machinery Industry", and "Top 500 China's Energy Groups", "China's Quality Integrity Enterprise". The "Wu Cai" brand was awarded the title of "Top 500 Asian Brands" and "Internationally Famous Brands Focused on Cultivation and Development in Jiangsu Province". The company was listed in Hong Kong in April 2012, stock code: 01366.

The company covers an area of more than 650,000 square meters, with a construction area of 400,000 square meters, and total assets of more than 8 billion Yuan. There are more than 2,200 employees, among them, junior and senior technical and managerial personnel account for more than 30% of the total number of employees. There are more than 1,500 sets of domestic and foreign advanced production and testing equipment, including the VCV vertical type and CCV catenary type ultra-high voltage cross-linked cable production lines from Finland Maillefer Company, and the coiling and frame twisting equipmentfrom Germany Sket and, France Pourtier Company, wire drawing production line and 120 extruder from Italy Frigerio Company, and ultra-high voltage cable partial discharge detection system from SwitzerlandHAEFELY, etc.

The company has passed ISO9001 Quality Management System, ISO14001 Environmental Management System, ISO45001 Occupational Health and Safety Management System, ISO10012 Measurement Management System, GB/T29490 Intellectual Property Management System Certification, etc. The products have obtained International Certification including CE, SABS, RoHS, CB, TUV Rheinland, etc. The company mainly produces products of more than 100 varieties and more than 40,000 specifications in three categories, including power cables up to 500kV, electrical equipment cables, and bare wires up to 1100kV. The Company can also customize special wire and cables for users with various special performance requirements. The company's flexible mineral insulated fireproof cables, photovoltaic cables, electric vehicle charging cables, locomotive cables, UHV supporting heat-resistant expanded conductors and other special cables are well received by the market and users.

The company has strong scientific research strength, with a National Post-Doctoral Scientific Research Station, Jiangsu Enterprise Academician Workstation, Jiangsu Enterprise Technology Center, Jiangsu Special Cable and Applied Engineering Technology Research Center, and a laboratory assessed by the National

Accreditation Service (CNAS). At the same time, it has established a close

cooperative relationship with major domestic research institutes. For series conductors of UHV transmission lines, the highest voltage level can reach DC±1100kV and AC 1000kV, and the maximum cross section can reach 1840mm2."The conductor and cable with identification function and the conductor preparation method and forming device", innovatively apply permanent unique identification mark on the conductor, successfully solved the problem of the conductor anti-counterfeiting requirement in a foreign region. The company currently has 185 valid patents, including 19 invention patents, undertaking more than 30 provincial and municipal scientific and technological projects; participating in the formulation of more than 50 national and industry standards.

The company always regards quality and service as the foundation of the company's survival. It conducts strict inspections from raw materials entering the factory to finished products leaving the factory. The company adopts foreign advanced online polarization meters, high-voltage series resonance, partial discharge and other high-tech instruments to monitor the manufacturing process. The quality of the company is strictly controlled, so that the stability of the product can be reliably guaranteed. The one-stop service provided by professionals before, during and after sales has been trusted and praised by the majority of users. The company is actively exploring overseas markets and has established a stable sales network in nearly 100 countries and regions on five continents including Singapore, South Africa, the United Kingdom, Australia, Russia, and Southeast Asia, etc.

The development goal of the company is to become a first-class enterprise in Asia by 2025, with an annual production and sales of over 30 billion Yuan, a large-scale enterprise group integrating science, industry, and trade. Integrate with the international advanced model in management to achieve standardized management, scientific; increase the investment in cultural construction to form a good corporate culture;extensively introduce international talents to improve the competitiveness of enterprises in an all-round way, so that the company could change from a quantitative change in scale to a qualitative change in connotation.

The company is located in the national wire and cable industry base -- Guanlin Town, Yixing City, Jiangsu Province. It has always adhered to the business philosophy of "integrity and pragmatic, customer first" and is willing to supply more high quality products, perfect service, as always with new and old friends at home and abroad for sincere cooperation, mutual benefit and win-win!